For determination of compression strength of cement by testing cement cubes.
> Four Pillar Load Frame.
> Piston (Ram) & Cylinders are duly Hard Chromed.
> Electrically cum Hand Operated.
> The machine is equipped with facility for Hand pumping in case of power failure.
> Micro Switch is incorporated inside the Pressure Gauge to shut off the motor automatically as the load approaches the rated capacity, which prevents it getting damaged due to over load.
> Electrically Operated on 230 Volts, Single Phase & 50 Hz.

It has capacity of 250 KN. The Dial of Pressure Gauge is Graduated from 0 to250 KN with a least count of 1.25 KN. 

For determination of compressive strength of cement by testing cement cubes.
> Four Pillar Load Frame.
> Piston (Ram) & Cylinders are duly Hard Chromed.
> The machine is equipped with Hand pump. 

Laboratory Model, Light Weight laboratory Concrete Mixer is designed to remove the burdensome work of hand mixing. Uniform & thoroughly mixed batches can be produced in the field or laboratory.

The counter balanced mixing drum is easy to tilt. Two cubic ft. mix capacity. Total drum volume is 3 cubic ft. Mounted on a sturdy rubber typed stand. Drum is mounted for end discharge. 

Provided with a handle to rotate the drum. Suitable to mix 1 cu.ft. to 1.5 cu.ft. Material. Mounted on two rubber tyres. 

As per IS 9013 - 1978.

It is developed to get the compressive strength of 28 days within short period by curing the concrete specimen by any of two methods namely warm-water method and boiling water method.

Double Walled. Outer Made of M.S. Inside made of S.S. With hinged Cover Lid. Long Heaters placed at the bottom. Can accommodate 6 / 12 / 24 / 36 moulds of 15 cm or 12 / 24 / 36 / 72 moulds of 7.06cm with concrete or mortar. Fitted with Microprocessor Based Dual Display Digital Temperature Indicator cum Controller. Temperature Range from 50°C to 100°C. Provided with water circulation arrangement to keep the temperature uniform. Overflow Nozzle is provided. Drain Cock for emptying tank is also fitted at the bottom. Operation on 230 Volts, Single Phase.

For curing 06 Nos. of 150 mm Cube Moulds or 12 Nos. of 70.6 mm Cube Moulds 

As per IS 9013 - 1978.

It is developed to get the compressive strength of 28 days within short period by curing the concrete specimen by any of two methods namely warm-water method and boiling water method.

Double Walled. Outer Made of M.S. Inside made of S.S. With hinged Cover Lid. Long Heaters placed at the bottom. Can accommodate 6 / 12 / 24 / 36 moulds of 15 cm or 12 / 24 / 36 / 72 moulds of 7.06cm with concrete or mortar. Fitted with Microprocessor Based Dual Display Digital Temperature Indicator cum Controller. Temperature Range from 50° C to 100° C. Provided with water circulation arrangement to keep the temperature uniform. Overflow Nozzle is provided. Drain Cock for emptying tank is also fitted at the bottom. Operation on 230 Volts, Single Phase.

For curing 12 Nos. of 150 mm Cube Moulds or 24 Nos. of 70.6 mm Cube Moulds. 

As per IS 9013 - 1978.

It is developed to get the compressive strength of 28 days within short period by curing the concrete specimen by any of two methods namely warm-water method and boiling water method.

Double Walled. Outer Made of M.S. Inside made of S.S. With hinged Cover Lid. Long Heaters placed at the bottom. Can accommodate 6 / 12 / 24 / 36 moulds of 15 cm or 12 / 24 / 36 / 72 moulds of 7.06cm with concrete or mortar. Fitted with Microprocessor Based Dual Display Digital Temperature Indicator cum Controller. Temperature Range from 50° C to 100° C. Provided with water circulation arrangement to keep the temperature uniform. Overflow Nozzle is provided. Drain Cock for emptying tank is also fitted at the bottom. Operation on 230 Volts, Single Phase.

For curing 24 Nos. of 150 mm Cube Moulds or 48 Nos. of 70.6 mm Cube Moulds. 

Used to determine the slump of fresh concrete as a measure of its consistency.

Consists of a slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of standard slumps cone and hold it securely while fitting and rotting. Provided with a combination swivel-carrying handle. Complete with graduated tamping rod 0-60 cm long and 16 mm Dia with 0-30 cm scale graduations. 

For compaction of concrete Cubes, Cylinders & Beams.

The table deck has stops along its edges to prevent moulds from walking off the table during operation. The variable pitch pulley arrangement permits the frequency to be varied step-less between a maximum of 3600 vibrations down to 2600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. The vibrator is mounted on cushioned Steel vibrating deck. A switch is provided for starting the motor. Operation on 440 V, three phase, AC supply.