Laboratory Aggregate Testing Instruments Supplier India
   
non destructive testing company
 
FREE PICK UP FACILITY : +91 8080906088 | 022-27578745/27562145    Registered office And Head Office : Belapur, Navi Mumbai    Branches : Kalyan/ Rasayni/ Kurla.
 
 
Our Products
Bricks Testing Aggregate Testing Instruments
Bricks Testing General Lab Equipments
non destructive testing of concrete Moisture Meter
ultrasonic non destructive testing Soil Testing Instruments
non destructive testing techniques Bitumen Testing Instruments
non destructive testing courses Measuring Instruments
non destructive testing courses Road Pavement Testing Instruments
non destructive testing ultrasonic testing Tile Testing Instruments
non destructive testing x ray Concrete Testing Instruments
non destructive testing equipments Non Destructive Testing Instruments
non destructive testing and evaluation Rock-Testing-Instruments
define non destructive testing Cement Testing Instruments
 
Our services
destructive and non destructive testing Aggregates Testing
non destructive testing in welding Bricks Testing
non destructive test Steel Testing
non destructive test equipment Cube Testing
non destructive test methods Concrete Block Testing
non destructive test for concrete Soil Testing
non destructive test of concrete Concrete Core Testing
non destructive test of concrete Water Testing
non destructive test of concrete Mix Design Testing
Cement Testing
destructive tests Bitumen Testing
ndt Non Destructive Testing
 
CONCRETE/CEMENT MORTAR
  Compressive Strength Of Concrete Cube
   

Out of many test applied to the concrete, this is the utmost important which gives an idea about all the characteristics of concrete. By this single test one judge that whether Concreting has been done properly or not. For cube test two types of specimens either cubes of 15 cm X 15 cm X 15 cm or 10cm X 10 cm x 10 cm depending upon the size of aggregate are used. For most of the works cubical moulds of size 15 cm x 15cm x 15 cm are commonly used.

This concrete is poured in the mould and tempered properly so as not to have any voids. After 24 hours these moulds are removed and test specimens are put in water for curing. The top surface of this specimen should be made even and smooth. This is done by putting cement paste and spreading smoothly on whole area of specimen.

These specimens are tested by compression testing machine after 7 days curing or 28 days curing. Load should be applied gradually at the rate of 140 kg/cm2 per minute till the Specimens fails. Load at the failure divided by area of specimen gives the compressive strength of concrete.
   
   
  Flexural Strength Of Concrete Beam
   
The test for flexural strength of concrete beams under third point loading utilizes a beam testing machine which permits the load to be applied normal to the loaded surface of the beam. The specimen is tested on its side with respect to its molded position. 
The beam is centered on the bearing supports. The dial indicator of the proving ring is placed at the zero reading. The load is applied at a uniform rate and in a way to avoid shock. The load required to cause specimen failure is obtained from the dial indicator's final reading and the proving ring calibration curve. 
   
 
 
 
 
 
Aggregates Testing | Bricks Testing | Steel Testing | Cube Testing | Concrete Block Testing | Soil Testing | Concrete Core Testing | Water Testing | Mix Design Testing |
| Cement Testing
| Bitumen Testing | Non Destructive Testing
 
Home  |  About us  |  Services  |  Products  |  Gallery  |  Quality  |  Human Resource  |  Contact Us  |  Enquiry  |  Sitemap
Copyright © SKG Project & Engg. Pvt. Ltd.  All rights reserved
Site Maintained by Technoriya